Smoothing Inlet

A stainless-steel smoothing inlet eases incoming flows to prevent accumulated sediment inside of the tank from becoming suspended. Installed with a 90-degree elbow, the smoothing inlet is connected to either 4” SDR 35 or S&D pipe. Gluing the device to the pipe is not required as it will be held in between the floor of the tank and pipe.

Find a Distributor › Contact an Expert › Manuals, Guides & CAD Details ›

Specifications:

Part Number
EB 0300

Description
WISY 4" Smoothing Inlet

Download the Smoothing Inlet Installation Instructions›

Compatible Products

Floating Intake & Water Pump

A floating ball suspends the stainless-steel mesh filter just below the surface positioning it in the optimal location: the clarified zone that exists between floating particulates near the surface and settled particulates at the bottom of the tank.
View ›
Potable Tank Storage

Low profile, Injection-molded polypropylene tanks are watertight and easy to install. Reinforced structural ribbing and fiberglass support posts provide exceptional strength and durability when installed correctly. Potable and non-potable tank options are available.
View ›
The 4-Inch Multi-Siphon Overflow Device

The Multi-Siphon Overflow Device siphons particulate-laden surface water
through the overflow device and out of the storage vessel. It also prevents storm drain odors and rodents from reaching the inside of the tank.
View ›
Vortex Filtration

A self-cleaning filtration device circulates water through its internal housing until reaching a stainless-steel sieve basket capable of filtering water up to 280 microns before passing debris-free rainwater to the tank. Leaves, pebbles, and other forms of debris simply fall through the bottom of the housing and are
discharged to daylight elsewhere on the homeowner’s property.
View ›